It’s time to start the build of Minairons Minatures IGC Sandurni tank. However, considering that this kit consists of just three parts plus a machine-gun barrel, perhaps “build” isn’t quite the right word? Anyway, I’m planning to attach the tracks and suspension units to the sides of the hull later, to give me better access to the top of the tracks for painting.
Therefore, the only job to be done before starting painting is to open out the lower part of the suspension units. Resin casting means that there is a thin film of resin on the inside of the wheel/track/suspension assembly on each side. I think the finished model will look better is this is opened out, so with drills and fine files, I cut away the film of resin between the wheels, tracks, sprockets and idlers. This isn’t difficult, it just takes a little care to ensure that the main parts aren’t damaged.
With this done, I begin painting with a sprayed undercoat of olive drab. After this, all painting is done with brushes. One thing that is clear, though it doesn’t particularly show up in these photos, is that the resin hull has a slightly rough texture that nicely replicates unfinished steel.
I add highlights in white to pick out raised detail and emphasise things like the rivets on the suspension cover plates.
Then, I apply a thin overcoat of Mig Jiminez Olivegrun. One thing I like about these Mig paints is that they are translucent, so the highlights beneath show through, but they are muted and blended. Then I paint the roadwheel tyres, and not that’s not a job to be tacked if you are suffering from coffee shakes! Though, to be fair, the moulding here gives a clear distinction between wheels and tyres which does make things easier. I then paint the tracks – all I do at this point is to paint the tracks overall dark gunmetal with lighter gunmetal highlights on the cleats and edges. I also add the decals on the hull. I notice that the large decal on the hull front is showing some signs of silvering despite my having used Vallejo decal fix and decal softener, but fortunately this isn’t too apparent. Then everything gets a coat of matt clear varnish.
Then, it’s on to oils. The tracks get a wash of black oil to emphasise recessed areas and the hull, running gear and suspension cover plates get a pin wash of dark green to bring out shadows. I add some light chipping and wear at the edges of hatches and other parts and the tracks are completed with an acrylic brown wash to suggest rust and dirt. The hull machine gun is painted and fixed in place using a two-pack epoxy resin glue and the side-pods are fixed to the hull using the same glue. The location for these parts is only average, so some care is required while the glue sets.
Then everything gets a final coat of clear varnish that’s it done!
This kit is a very quick build and paint. The whole job can be finished in a weekend and, do you know what? That’s really satisfying! I am fairly happy with the finished IGC Sandurni and I think this is a very worthwhile kit if you are in the mood to tackle something completely different.
The main issues here are related to the tiny size of this tank. How small is it – well, here it is next to a 1/72 Revell Tiger.
You see what I mean? Next to the Sandurni, the Revell Tiger looks gigantic! Making a kit with so few parts and so small isn’t really about construction, it’s all about painting. The size of this kit does make elements of this painting a challenge, and my painting skills certainly aren’t the best, but it’s possible to end up with something that looks decent and will stand out as an interesting curiosity in any 1/72 armour collection.
I highly recommend the Minairons IGC Sandurni for a quick-fix of modelling satisfaction. And as for resin kits, well, again the fact that parts are provided as complete assemblies does make painting a little tricky, but if the moulding is as clean and sharp as it is here, then it isn’t really much more difficult than painting any 1/72 kit. Do you fancy a complete change? Then this tiny kit may be the answer….