It’s time to start the build of the StuG IV. I’m looking forward to this one because, in my limited experience, these older Tamiya kits are simple to build and fit is generally very good indeed. Because they were originally designed as motorised kits, the upper and lower hull are separate assemblies that can be joined later in the construction process, and that can make painting things like the roadwheels, sprocket idler and suspension a little simpler. I have decided to use the kit decals to model a StuG of Sturmgeschütz-Brigade 237 (formerly Sturmgeschütz-Abteilung 237). This unit was formed in February 1944 and took part in action on the Eastern Front in defence against the Soviet offensive known as Operation Bagration.
I’ll be going for an overall dunklegelb (dark yellow) finish without any additional camouflage. As ever, I’ll be brush painting just about everything and I hope to create a slightly battered looking StuG from the early Summer of 1944.
I begin with assembling the various part of the upper and lower hull and the main gun. And it’s immediately obvious that fit is simply superb. Everything assembles with no gaps; the placement of parts is generally clear and there is no need for filler anywhere.
I assemble the upper hull with the loader’s hatch open (I’ll be placing the figure from the kit in this hatch) but with the Commander’s hatch closed. In retrospect, I might have been better to leave the Commander’s hatch open because the kit includes a rather nice representation of the periscopic Commander’s sight.
I also work on the Schurzen side armour at this point. In the kit, all five panels on each side are modelled as a single piece. However, in reality these were separate plates so I carefully cut the armour into five pieces on each side. Each panel is provided with its own mounting points and I’m hoping that cutting out the individual panels will be enough to suggest that these are separate parts without bending the individual panels as I have seen done on some kits. This also gives me the option of leaving out one or more panels, something that was frequently seen on well-used vehicles.
I then spray everything with a base coat of Tamiya TS-68 from an aerosol can, simply because I have a little left in a can and at least it gives me a consistent base to work on.
I’ll be using MIG Jimenez acrylic paint for the main colour, with Dunklegelb Base and Dunklegelb Shine for highlights. One thing I do like about these paints is that they’re translucent, so I apply the Shine first to areas that would reflect more light…
Then I add a top coat of the Base colour, leaving the highlighted areas still just visible.
Next, I carefully paint chipped areas on the upper and lower hull as well as on the gun and mantlet. I use a dark grey to suggest an exposed undercoat and I try to keep it logical – raised areas and places where there would be likely to get wear show more chipping.
Then, I paint the tyres on the roadwheels and return rollers – not one of my favourite jobs! I also paint the tools, tow cable, jack and MG34 at this stage, and I’m trying a different technique here. I paint all these items dark grey and then highlighted edges and worn areas with a soft pencil.
I’m fairly happy with the result and these are added to the hull and the decals are applied using Vallejo Decal Fix and Decal Softener. The decals are fine, though they do feel a little thick.
Then, and I fix the gun and mantlet in position – a nice touch is that the gun can both traverse and elevate when it’s in place. Everything then gets a coat of clear matte varnish before I start on the oil wash to bring out shadows. I use Abteilung oils dark mud, a fairly dark brown which contrasts nicely with the dark yellow finish. The fine panel detail makes highlighting recessed lines fairly simple.
Then I join the upper and lower hull parts. Hey, it’s starting to look like a StuG!
I assemble the exhaust and give it a coat of Tamiya white putty to simulate a rusty texture and then paint it orange before overpainting with a thick layer of the same oil paint I used for the shadow wash. I then use thinner to rub off some of the oil paint and this gives a blotchy finish that kind of looks like rust. I’m also happy with the effect of the pencil highlights on the tow cable.
Then the tracks get the same treatment as the tools – after a base coat of dark gunmetal and a coat of clear varnish, I use a pencil to add a soft metallic shine to raised areas. When they’re in place I’ll add some brown acrylic wash to suggest rust and dirt.
Wrestling the vinyl tracks into position is fairly simple. They aren’t too tight, though it would be difficult to simulate any sort of sag. However, on this kit the top run of the tracks will be hidden by the Schurzen plates, so this isn’t a major issue.
The figure is next and, once again, I’m really not sure about the information provided by Tamiya. The painting guide on the box. This shows the figure wearing a camouflaged jacket and a green cap and trousers.
The style of the unform is certainly correct with the wrap jacket, but all the references I can find suggest that StuG crews (who were members of the artillery rather than panzer troops) wore grey uniforms throughout the war. So, I give my crewman a grey uniform, which also means I don’t have to attempt a complex camouflage pattern, something I think I’d find very challenging in 1/35 – I have to admit that my figure painting skills aren’t the best! A pistol holster is included in the kit but, as the figure doesn’t have a belt, there isn’t anywhere to hang this. The kit also includes headphones, but these fit so badly on the figure’s head that I leave them off.
The last jobs are to add the two radio antenna and hang the Schurzen plates on either side – they don’t have to be glued in place, so you can display the finished kit with one or more plates missing. And that is the StuG IV pretty much done…
After Action Report
Other than adding some rusty texture to the exhaust with Tamiya white putty (and that was the only occasion I needed to use any filler on this kit), cutting the Schurzen side armour into individual plates and adding the radio antenna, this build is straight out of the box. I’m very happy with the result and the kit itself is a sheer pleasure to build. There aren’t a great many tiny parts and what there is fits perfectly. The instructions are generally clear (though I did struggle to understand where to place the rear towing hooks) and there is nothing really challenging in this build.
As with the other old Taimya 1/35 kits I have built, this was just fun and relaxing to build and paint. Perhaps the tracks could be better and there is a gap between the upper hull and the top of the roadwheels that can be seen from some angles through the open loader’s hatch, though it would be simple to fill this with plastic card – I failed to notice until I had joined the upper and lower hull. I’m sure that more recent kits of the StuG IV provide more detail and things like stowage items on the outside of the hull. Nevertheless, this builds into a reasonable representation of a StuG IV for very little money.
Two generations of German tank destroyer in 1/35
Italeri Marder III behind
Overall, this kit is highly recommended and it might be especially appropriate for someone coming to 1/35 armour kits for the first time.